The company warmly welcomes new and old customers from all walks of life to visit and negotiate business, and wholeheartedly provide quality products and perfect services for your development
Performance characteristics and use skills of reducer
Reducers are widely used in metallurgy, mining, lifting, transportation, cement, construction, chemical industry, textile, printing and dyeing hard tooth surface reducer, pharmaceutical and other fields. Hard tooth surface reducer is a power transmission mechanism that uses the speed converter of the gear to decelerate the number of rotations of the motor to the required number of rotations and obtain a larger torque. Four major skills for the use of the reducer: First, during the work, when the oil temperature rises more than 80 °C or the oil pool temperature exceeds 100 °C and produces abnormal noise, it should be stopped, check the cause, eliminate the fault, and replace the lubricating oil before continuing to operate Second, when changing the oil, wait for the reducer to cool down without the risk of combustion, but it should still be kept warm, because after complete cooling, the viscosity of the oil increases and it is difficult to drain oil. Note: Cut off the power to the transmission to prevent unintentional power. Third, after 200~300 hours of operation, the yi oil change should be carried out, and the quality of the oil should be checked regularly in the future use, and the oil mixed with impurities or deterioration must be replaced in time. Under normal circumstances, for the reducer that works continuously for a long time, replace the new oil according to 5000 hours of operation or once a year, and the reducer that has been out of service for a long time should also be replaced with new oil before re-operation. The reducer should be added with the same oil as the original brand, and should not be mixed with different brands of oil, and oils of the same brand but different viscosity are allowed to be mixed. 4. The user should have reasonable use and maintenance rules and regulations, and the operation of the reducer and the problems found in the inspection should be carefully recorded, and the above provisions should be strictly implemented.