The company warmly welcomes new and old customers from all walks of life to visit and negotiate business, and wholeheartedly provide quality products and perfect services for your development
How to deal with the surface damage of the reducer
The surface of the reducer is easily damaged, if there is surface damage, how should we deal with it, the following for the reducer surface damage should be dealt with a brief understanding: 1. Once the bearing is severely worn, overloaded or impacted and the reducer bearing is slightly deformed or bent, it will cause the rotor to sweep. As a result of sweeping, the surface of the iron core is scratched, and the heavy core is worn and the winding is burned by touching the shell, and the power supply should be cut off immediately, so that the gearmotor stops working and inspects. 2. The silicon steel sheet at the core abrasion part is annealed due to friction overheating, resulting in a decrease in the magnetic permeability of the silicon steel sheet, if not treated in time, with the aging of the core insulation of the planetary gear reducer, the eddy current continues to increase, resulting in an increase in the temperature rise of the planetary gear reducer, and the micro motor overheats or even burns out. 3. The winding insulation breakdown short circuit or the winding short circuit to the ground produces an arc, so that the surface of the core is burned, and the surface of the burned core is often uneven. This not only affects the normal operation of the reducer, but also leads to a short circuit between silicon steel sheets, which increases the core vortex. After understanding how to deal with the surface damage of the reducer, I hope that it will be more helpful to us in the future, and at the same time will bring greater benefits, which is also more conducive to our use.